Garden machinery is a very big concept. It is all the tools that will be used in the cultivation of gardens. It has been widely used in China. One of them is called the high branch machine, which is also used frequently. Some high branches and leaves will be used for pruning. However, because this machine is not very simple to use, and according to the use survey in recent years, it is found that the high branch machine has a certain danger in use. Therefore, recently, consumers have some problems that need to be solved with the Gaozhi machine. Today, we will explain the use of the Gaozhi machine.
First, the details of pruning the branches
Usually, when pruning the branches with a trencher, the upper part of the branches should be cut after the upper part of the branches is cut, which can reduce the possibility of being hurt by the pinching saw. When Xiuji is pruning the lower branches, the larger branches should not be cut off at one time, but should be cut into sections. When trimming, pay attention to that the action should not be too rigid. You can naturally hold the handle to keep the machine at an angle of 60 degrees to the ground. It is easy to operate. Consumers are advised to wear protective gloves throughout the process to avoid finger injuries. The necessary protective articles should also be used, such as special shoes, helmets, protective caps, etc. When you really start trimming, you must have a center of gravity, stand firmly, and try to avoid the possibility of slipping. There are also some precautions for the places where the high branch machine is used. In order to avoid fire, try not to use it in places where there is fire.
When the fuel is insufficient during use, the engine must be stopped for a few minutes to cool the machine before use, and refueling in the air shall be avoided as far as possible.
Second, the storage of the machine after use
The storage of the Gaozhi machine is also very important, which is related to the quality of the machine and the quality of the next use. Generally speaking, clean the machine before storage. Clean the whole machine in a ventilated place. Remember to dry the carburetor. If the carburetor is not dry, problems may occur that affect the next use. In short, the trencher should be cleaned and checked repeatedly before storage. The high branch machine is stored in a place that is out of the reach of children, or in a safe place to avoid accidents.
In garden machinery, the high branch machine is a more common application. Of course, the choice of oil products is also very important in the use of high branch machines, and some technical maintenance is also required. Since ordinary people do not know about technical maintenance, it is recommended that consumers with high branch machines hire professional technicians to carry out technical maintenance of high branch machines.